Vertical Mill Maintenance Tools And Methods

Vertical Mill Maintenance Tools And Methods

Tools and methods for maintaining vertical mill maintenance

Guide: The vertical mill has the function of breaking, grading and drying, and the combination function of each component is very obvious. In the course of use, to understand the structural characteristics of the equipment, first remove the connecting bolts of the rear upper frame and the middle case, and then use a wrench to screw the hex head part of the flip device, and then the upper frame is slowly opened. At the same time, the rear frame can be suspended by the hanging device above the rack. The basic operations of these vertical mills are interlocking, and the correct production line operation should be carried out according to the structure of the equipment.

Vertical Mill Maintenance Tools

The importance of vertical mill maintenance

All vertical mill equipment will give instructions on the operation of the relevant equipment at the factory, but it is not possible to avoid machine wear caused by some operational errors. Therefore, regular maintenance of the vertical mill is of great significance. Regarding the maintenance skills of the vertical mill, we have summarized several aspects for the user to refer to. The material falls vertically from the feeding port into the impeller of high-speed rotation, and generates high-speed impact pulverization under the action of high-speed centrifugal force. The finished material is discharged straight from the lower part after classification, forming a closed circuit for multiple cycles.

Vertical mill maintenance and operation skills

  1. Safety issues must be constantly carried out. To ensure the safety of operators and equipment, repairs, adjustments and cleaning work are prohibited during vertical mill operation.
  2. After the vertical mill is in normal operation, it starts to feed evenly and prevents the iron block from being mixed. The feeding must be stopped before stopping, and the motor is stopped after the material is broken.
  3. If the particle size of the finished product does not match the parameter requirements, stop the plate to check the wear of the hammer to prevent the rotor from being worn out.
  4. Regularly check whether the fasteners are loose. Our vertical mill is equipped with a limit device to prevent direct contact between the roller sleeve and the disc liner. Focus on checking the pressure plate screws of the compression hammer on both sides of the rotor to prevent loose parts.
  5. Always check whether the bearing housing seal is good. The grease in the bearing housing should be filled once a month, and all cleaning should be carried out every three months to ensure the plot of powder processing.

Tips for maintenance of vertical mills

The vertical mill has the functions of breaking, grading and drying, and the combination function of each component is very obvious. In the course of use, to understand the structural characteristics of the equipment, first remove the connecting bolts of the rear upper frame and the middle case, and then use a wrench to screw the hex head part of the flip device, and then the upper frame is slowly opened. At the same time, the rear frame can be suspended by the hanging device above the rack. The basic operations of these vertical mills are interlocking, and the correct production line operation should be carried out according to the structure of the equipment.